Table Top Epoxy Resin

Product Description

HIGHLIGHTED FEATURES:

• Suitable for all kinds of casting up to08-10 mm
• Crystal Clear
• Super High Gloss
• Mixing Ratio 3:1
• Very strong
• Self-leveling
• 100% Solid, No VOCs
• Great Air release
• Slow cure (24 hours @ room temp.)
• Heat resistant
  
  

PACKAGE INCLUDES:1 kg(Resin 750 grams + Hardener 250 grams)

DESCRIPTION:

MB EPOXY TABLE TOP RESIN is specially formulated to give a high gloss in clear casting and leaves a glass-like finish. This product provides a slow cure and property development at ambient and low temperatures without accelerators ad allows for a quick return to service.

Approved Applications:

• Wood
• Casting
• Coffee table
• Counter tables
• Coaster
• Table tops
• Craft coatings
• Jewellerymaking (small casting or multi-layered)
• Hobbyist and craft making
• Plaques and frames
• Pebble coating

TECHNICALDETAILS:

DETAIL TIME TEMPERATURE

POT LIFE 60 mins @25-30 deg C

WORK TIME(POST POUR) 120 mins @25-30 deg C

TOUCH DRY 10-12 hrs @25-30 deg C

FULL CURE 24 hrs @25-30 deg C

NOTE:

The typical pot-life on this item is roughly 45-60 minutes based on mass and temperature.

The full cure is 24 hours at normal conditions.

MEASURE:

Wearing your gloves on, Pour the desired amount of Part A into a measuring container.

Pour Part B into the Part A container until itïs at the right mark to make it a 3:1 ratio.

You can refer to our resin coverage calculator to determine how much you'll need

https://www.mbenterprises.co/calculator

PRO TIP -

Mix up a little more than you think youïll need because you want to completely cover your work in one shot and not have to mix more later.

MIX:

Mix for at least 10-12 minutes in a round motion until the chemical is clear and free of striations

Allow the mixed components to stand in your mixed cup for at least 2-5 minutes.

POUR:

Pour along the side of the container to help alleviate air entrapment. This allows for bubbles to rise to the surface.

Small castings and potting units may take longer to cure than larger items.

WAIT:

MB EPOXY TABLE TOP RESIN needs to sit for several hours in a dust-free space while it cures.

In about 10-12 hours it will be touch dry.

It will be fully cured within 24 hours.

NOTE:

Cold weather slows the curing process down, whereas heat speeds curing up